Various Processing Properties Of 316 Stainless Steel Wire Mesh

In industrial production, the common 316 stainless steel wire mesh is actually a kind of stainless steel containing molybdenum. Compared with 317 type, the content of 316 stainless steel wire mesh is relatively lower. It is precisely because of the molybdenum in the 316 stainless steel wire mesh, because the performance of the 316 stainless steel wire mesh is even better than the ordinary stainless steel wire.
Under high temperature conditions, when the liquid concentration of sulfuric acid is lower than a certain percentage, 316 stainless steel wire mesh has a wide range of uses. Not only that, 316 stainless steel wire mesh also has satisfactory resistance to chloride erosion, so it can generally be used in marine backgrounds. It is precisely because of such superior performance that this 316 stainless steel wire mesh is becoming the new favorite of the industrial market until now.
In the process of industrial processing, it is generally necessary to place 316 stainless steel wire mesh in a temperature range of nearly 2000 degrees for annealing, then quickly anneal, and then quickly cool down. Most manufacturers want to harden 316 stainless steel through this standard style of. In terms of cost, the hardening treatment of 316 stainless steel wire mesh is still in the stage of high investment, and the new scheme is still under development.
From the analysis of welding performance, 316 stainless steel wire mesh also has satisfactory welding performance. Under normal working conditions, it can be welded using all standard welding methods as it sees fit. When welding, according to the application, different stainless steel filler rods or welding rods can be used for welding according to the application, and finally stainless steel products that meet the needs of industrial production can be obtained. In most working conditions, in order to improve the quality of the product and obtain the best corrosion resistance, the 316 stainless steel wire mesh section needs to be welded and annealed after welding, so as to greatly increase the resistance of the stainless steel product. Corrosion and toxicity, but also better put into normal production.